Neumann TLM 103 Condenser Microphone (Matte)
The Neumann TLM 103 is the ideal large-diaphragm condenser microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget. The TLM 103 is available in satin nickel and matte black. Due to the universal cardioid pattern, straightforward handling, extremely low self-noise level, and finally, the price, the TLM 103 is predestined for all demanding applications from home recording to professional broadcasting and commercial recording studios. By utilizing the tried and true transformer-less circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that used in the U 87, has a cardioid pattern, is acoustically well-balanced and provides extraordinary attenuation of signals from the rear. Delivery includes an SG 1 metal swivel mount and a wooden jeweler's box.
The TLM 103 is equipped with a large diaphragm capsule with cardioid pattern. By focusing on this pattern – used in most recording situations – the attenuation of unwanted rear sound has been optimized. Off-axis sounds are rendered naturally while isolation is increased. This also leads to a high feedback suppression when the microphone is used in live situations or where loudspeaker playback is a factor. The TLM 103 is addressed from the front, marked with the red Neumann logo on the microphone body. The K 103 large diaphragm capsule is based on the K 87, well known from the U 67 / U 87 microphones. The capsule has a flat frequency response up to about 5 kHz, and above that, a wide flat 4 dB presence boost. The large wire mesh head-grille protects the capsule from plosive sounds and effectively prevents pop noises. These characteristics are achieved without resorting to corrective resonance effects. Therefore, the microphone maintains an excellent impulse response and reproduces the finest details of music and speech without coloration.
With just 7 dB-A / 17.5 dB CCIR the self-noise level of the TLM 103
is so reduced that even the smallest signals are reproduced basically noise-free. It is capable of handling sound pressure levels up to 138 dB without distortion. The letters TLM
stand for "transformer-less microphone
." With TLM
technology the usual output transformer is replaced by an electronic circuit. As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal.
The entire internal construction is elastically mounted to attenuate any structure borne noise that could interfere with the TLM 103
's operation. Furthermore the capsule is set on an elastic mount. The frequency range reaches below 20 Hz and thus even very low bass signals are reproduced without coloration. Due to this low frequency extension, the TLM 103
is more sensitive to structure borne interference and wind noise. For such cases, the elastic suspension EA 1 and the windscreen WS 87 are available as accessories. For close vocal use, the PS 15 or PS 20 a pop screens are recommended.
The Neumann TLM 103 is the new standard for home recording and the music industry. The mic for everyone who, despite budget limitations, does not want to do without the uncompromising Neumann sound. Cardioid directional characteristic and very low self-noise.
(1) A universal cardioid mic.
(2) Vocalist recording.
(3) Announcer's mic for broadcasting/voice over.
(4) Due to minimal self-noise: on-air mic for radio/broadcast, very low amplitude signals, radio drama, sampling, foley/sound effects.
(5) Home recording and project studios.
(6) Spot mic for: wind instruments, strings, percussion, guitar amps, drum overhead.
(7) These are just some of the most common applications. We recommend additional experimentation to gain maximum use from this microphone.
What's In the Box?
Neumann TLM 103 Microphone
SG 2 Stand Mount
Limited 2-Year Warranty
Acoustical Operating Principle: Pressure gradient transducer
Directional Pattern: Cardioid
Frequency Range: 20 Hz to 20 kHz
Sensitivity at 1 kHz into 1 kohm: 23 mV/Pa
Rated Impedance: 50 ohms
Rated Load Impedance: 1 kohms
Equivalent Noise Level, CCIR: 17.5 dB
Equivalent Noise Level, A-weighted: 7 dB-A
Signal-to-Noise Ratio, CCIR (rel. 94 dB SPL): 76.5 dB
Signal-to-Noise Ratio, A-weighted (rel. 94 dB SPL): 87 dB
Maximum SPL for THD 0.5%: 138 dB
Maximum Output Voltage: 13 dBu
Powering Power Supply: 48 V ± 4 V
Matching Connector Microphone: XLR3F
Diameter: 60 mm
Length: 132 mm