Furman M-8S Power Sequencer
Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load. Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system where power sequencing is desired.
Install an M-8s in to the top slot of your rack, and the six delayed outlets in the rear panel will power up sequentially and protect all your equipment up to a 15-amp load. Includes 3 delayed outlet banks - each with 2 outlets - plus 2 un-switched outlets.
Features at a Glance
- Power Sequencing
- Prevents excessive inrush currents.
- Six sequenced rear panel outlets (in three groups), two unswitched rear panel outlets, and one front panel unswitched outlet.
- Momentary and maintained sequencing via rear panel terminal block or front panel switch (momentary only).
- Noise Filtration
- Noise filtering to reduce radio frequency and electromagnetic interference.
- Surge Protection
- Ensures equipment stays safe.
- 9 Total Outlets
- Eight rear panel outlets and one front panel convenience panel outlet.
- 15 Amp Rating
- 15 amp rating, with circuit breaker.
- "Protection OK" Indicator
- Front panel indicator LEDs for Outlet Banks, Protection OK and Power Status.
- Wall Wart Spacing
- Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters.
- All settings and configurations available on rear panel.
- Family: Merit Series
- Line Voltage: 120 (Volts)
- Shipping Info
- Length: 21.9 (Inches)
- Width: 9.4 (Inches)
- Height: 3.4 (Inches)
- Weight: 7.65 (Lbs)