Behringer Analog Bass Synthesizer (Silver)

$224.99 $149.99
(You save $75.00)
Write a Review
SKU:
Behringer-TD-3-SILVER
UPC:
653341345530
Condition:
New
Shipping:
Calculated at Checkout
Reverb_Sync:
on
Behringer Analog Bass Synthesizer (Silver) (Behringer-TD-3-SILVER)
Currently Sold Out

Behringer Analog Bass Synthesizer (Silver) || Analog Bass Line Synthesizer with VCO, VCF, 16-Step Sequencer, Distortion Effects and 16-Voice Poly Chain.

  • Amazing Bass Line synthesizer with true analog circuitry for bass and groove sounds
  • Authentic reproduction of original circuitry with matched transistors
  • Pure analog signal path based on legendary VCO, VCF and VCA designs
  • Sawtooth and square waveform VCO with transistor wave-shaping circuitry
  • Amazing 4-pole low-pass resonant filter with cut-off, resonance, envelope, decay and accent controls
  • Easy-to-use 16-step sequencer with 7 tracks, each with 250 user patterns
  • Arpeggiator with wide patterns for great sound effects
  • Distortion circuitry modeled after the DS-1* adds insane spice and edge to your sounds
  • 16-voice Poly Chain allows combining multiple synthesizers for up to 16 voice polyphony
  • 11 controls and 28 switches to give you direct and real-time access to all important parameters
  • MIDI and USB implementation with MIDI channel and Voice Priority selection
  • 3-Year Warranty Program*
  • Designed and engineered in Italy

A Passion for Keyboards. Our founder, Uli Behringer has a deep passion for keyboards. Born in the small town of Baden, Switzerland in 1961, Uli grew up in a musical family where his mother taught him to play the piano at the tender age of four. His father was a scientist who built a massive organ in the family home and taught the young lad all about electronics. So at the age of 17, Behringer built his first synthesizer – the UB-1. Later, while attending college to seek a degree in audio engineering, Uli put his electronics knowledge to use, building his own equalizers and signal processors to fill the gap left by the university's inability to provide enough proper studio gear. Word soon spread about how good his products were, and he began building gear for his friends – the BEHRINGER legacy had begun. The rest, as they say, is history...

TD-3-SR. Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-SR lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-SR is sure to become one of your favorite synthesizers.

Pure Analog Signal Path. Great care has been taken in engineering the TD-3-SR, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-SR its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects – all the way out to the otherworldly sounds of your imagination.

Rock Right out-of-the Box! Your TD-3-SR comes ready to rock, thanks to its default signal routing that doesn’t require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and ’90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history – or to design incredibly fat and original sounds that will make you a legend in your own right!

Versatile VCF. The very heart of TD-3-SR’s sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

Vintage Oscillator. TD-3-SR’s authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

Onboard Sequencer & Arpeggiator. The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern. The onboard Arpeggiator features wide patterns you can build to provide a virtually-endless array of sound effects. Both the sequencer and arpeggiator in the TD-3-SR are fun, mesmerizing and totally addictive...

Kick it Into Distortion! We saved one of the most exciting features for the last stage in the all-analog signal path – Distortion! When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the “envelope” to the max. The crowd won’t know what hit ‘em! 

16-Note Poly Chain Ready. While it is a monophonic instrument (one note at a time), TD-3-SR’s 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony – plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

Controls & Connectivity. We just can’t help ourselves – like you, we're gear-heads, too. For those who want the numbers, TD-3-SR has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-SR’s tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices!